Timberex Hard Wax Oil offers a compromise of a tradtional oil and a coating with superior protection against spillages.

It greatly enhances colours and grain and allows wood to age naturally into rich varying tones. Can be used on all surfaces such as wood floors, furniture and worktops.  From low-high traffic areas.

• Made from fast curing natural plant oils and wax

• Available in matt or satin finish and can be mixed with any of our 10 coloured oils

• Same day application and finish

• Easy to apply with a brush or roller 

• Easily refurbished

• Does not leave swirl marks

• VOC2010 complaint and EN71-3 Certified (Food- and Toy-safe)

Timberex A+

VOC logoEN71 logo

PRODUCT DATASHEETS

We recommend to download and read the instructions on the detailed product-datasheet thoroughly before application.  Further details can be found on the back on each can.

TIMBEREX Hard-Wax Oil Product Datasheet

MATERIAL SAFETY DATASHEETS 

Our Material Safety Datasheet can be downloaded directly from this site which will ensure you also have the latest version of the MSDS for the products of your interest.

TIMBEREX Hard-Wax Oil Material Safety Datasheet

 

 

FREQUENTLY ASKED QUESTIONS

This section is divided into sections of Cleaning, Oiling and General Advice.  We recommend that our customer read all sections if possible.

Section: Cleaning

When can I start washing my floor?

We recommend to wait 2 weeks to let the oil harden completely. After that period you can wash everyday or when needed, but ensure to use the correct mixtures and the right product.

How do I remove stains and marks off the floors?

95% of all household stains like water, food and wine can be easily removed either by using our Bio-C Cleaner or with tougher stains, use a medium grade nylon pad with our Satin Oil products or our Satin Oil Gold Mousse (foam) which is ideal for smaller areas.  If the stain is still there, use sandpaper to remove the stain and re-oil with Satin Oil.

I keep getting stains and marks that I can't get off. What can I do?

If you start experiencing this, it usually means that it's time to refurbish the floor with an maintenance oil. 95% of all common stains can be removed on a well-maintained surface.  A light sanding of the surface might be needed to remove any stains that have been left on the surface to long.

How often do I need to refurbish/maintain the floor?

Once a year or whenever needed. Depending on the use of the surface, the intervals can vary quite a bit. High traffic areas like airports add maintenance oil every 3 months. Low traffic areas like private homes might need maintenance every 10-15 years.  The rule is simple! Look at the surface, if it looks dry and worn and stains appear very easily, it's time for the maintenance.

Do I have to sand my floor again?

No. If you maintain your floor correctly, you will never have to sand again.

MY FLOOR IS LOOKING GREY AND DRY. WHAT CAN I DO?

This can be caused by using too much soap and water on the surface. This creates a "film" on the surface which is grey and that will stop you adding any oil to the floor when needed. The oil will lay on top and cause a sticky surface. To find out if you have such a film, simply take a coarse nylonpad, rub it on the surface. If there is any grey dust/powder on the pad, you got a film. But that can be easily removed by using a dry rough (brown or black) nylon pad on the surface. Buff the surface with the coarse pad, clean the floor with our Bio-C Cleaner before oiling.

Section: Maintenance 

HOW OFTEN DO I NEED TO REFURBISH/MAINTAIN THE FLOOR?

Once a year or whenever needed. Depending on the use of the surface, the intervals can vary quite a bit. High traffic areas like airports add maintenance oil every 3 months. Low traffic areas like private homes might need maintenance every 10-15 years.  The rule is simple! Look at the surface, if it looks dry and worn and stains appear very easily, it's time for the maintenance.

Do I have to sand my floor again?

No. If you maintain your floor correctly, you will never have to sand again.

Section: General Advice

How many coats do I need to apply?

We recommend 2 coats as a minimum. This will ensure that the wood has been saturated with oil and that will give you the long-term protection. All coverage figures are based on 2 coats.

How long do I need to wait between coats?

Depending on product, anything between 20 min. till 3 hours . Read the product datasheet carefully before you start.  The general rule is, if you start seeing dry patches on roughly 20-30% (look towards a natural light source) of the surface, start applying the next coat. Do NOT let the oil dry before applying the next coat. Repeat this until the surface will take no more oil.

When can I use my floor again after oiling?

We generally recommend to wait 24 hours after the dry-buffing before you use the floor again. If that is not possible, cover the floor for this period.

Can I mix Timberex products with each other?

Yes. Just make sure you make a note which mixture you use so you can re-create it if needed. Saying that, we do not recommend mixing our luts with anything.

Can I use this oil on my lacquered floor?

No. the oil will lay on top of the lacquer and create a sticky surface. Sanding is required.

Can I use the oil on my worksurface?

Yes. All Timberex Oils are EN71 certified which mean they are Food-and Toy-safe. We would recommend to use Timberex FREE or WAX-OIL or Hard-Wax Oil which offer more water-resistance.

I want more sheen to my floor. What can I do?

Yes you can, but keep in mind that oils can only be buffed to a certain grade. For extra high sheen, varnishes offer a better solution.   Use Timberex Free, Wax-oil or Hard-wax Oil and dry-buff the surface with a soft white nylon pad on the same spot for a longer period of time.

Are your products safe to use?

Yes, our products are very safe to use and you will find that none of our oils carry any warning symbols on the back of the tins. All our products are VOC2010 compliant and EN71 certified for food- and toy-safety. Within 24 hours all smells will have disappeared. Keep the windows open while you work with the oil to speed up this process.

Do I need any protective clothing for these products?

We do recommend to use protective gloves for our luts but nothing is needed for the oils. Read the material safety datasheet for each product carefully before use.

Can you products self combust?

Yes they can in certain circumstances. But we add ingredients such as sunflower oil and odorless kerosene to our products to lower the risks even further and we do not know of any cases for the last many years. Simply keep a bucket of water ready for the cloths to soak. As soon as they hit the water, the danger is gone. All our tins carry further information about this. Read them carefully before using any oil.


 

You might also like these products:

Timberex Wood Finishing Oils